Compac Technologies India Limited
Phase 9, Mohali, Punjab
GST No. 03AABCC8483F1ZS
Call 08048603027 83% Response Rate
Send E-mail
- Home
- »
- Product Range
- »
- General Purpose MPI Test Benches
| Minimum Order Quantity | 1 Piece |
| Layout | Horizontal |
| Current range | 1500, 2000, 3000, 4000, 5000, 6000 A |
| Maximum Length | 700 /1300 mm |
| Maximum Weight | 50, 100 Kg |
| Shot Time | Adjustable from 0.5s to 1.5s |
| Length of Test Bench | 1200/ 1800 mm |
| Capacity of Storage Tank | 20 L |
| Clamping Stroke Tailstock | 80 mm |
| Air Pressure Required | 4-5 Kg/Cm2 |
This machine is a horizontal bench type two vector machine. Circular Magnetic Field is generated by headshot & longitudinal field is created by encircling coil.
It can be used to test Shafts, Axles, Crank Shafts, Small Gears, Sprockets, Fasteners & any other component with L/D ratio of more than 2.
Note: Download brochure for technical specifications & features
| Current rating | Up to 6000 A |
| Maximum weight | 50, 100 Kg |
| Shot Time | Adjustable from 0.5s to 1.5s |
| Layout | Horizontal |
| Length | Up to 1500 mm |
| Power source | Electrical |
| MOC | SS, MS |
| Capacity of Machine | ||||||
| 1000A | 2000A | 3000A | 4000A | 5000A | 6000A | |
| Component Data | ||||||
| Maximum Length | 450mm/1000mm* | |||||
| Maximum Diameter | 75mm | 100mm | 150mm | 200mm | 250mm | 300mm |
| Maximum Weight | 50Kg | 50Kg | 50Kg | 50Kg | 100Kg | 100Kg |
| Current Flow Data | ||||||
| Headshot Current (Amp.) Eff. | 1500A | 2000A | 3000A | 4000A | 5000A | 6000A** |
| Headshot Current Waveform | AC & HWDC | |||||
| Step Size (Amp) | 50A | |||||
| Shot Time | Adjustable from 0.5s to 1.5s | |||||
| Coil Capacity (KAT) Eff. | 6.0 | 7.5 | 10.0 | 12.5 | 10.0 | 10.0 |
| Step Size (KAT) | 0.1 | |||||
| Shot Time | Adjustable from 0.5s to 1.5s | |||||
| Flux Flow Coil Capacity (KAT) | 15.0 | 25.0 | ||||
| Flux Flow Current Waveform | FWDC | |||||
| Step Size | Manually Adjustable through Variac | |||||
| Shot Time | Adjustable from 0.5s to 1.5s | |||||
| Minimum Order Quantity | 1 Number |
| Layout | Horizontal |
| MOC | SS, MS |
| Power source | Electrical |
| Surface finish | Polished |
| Length | Up to 1500 mm |
This machine is a horizontal bench type two vector machine. Circular magnetic field is generated by headshot & longitudinal field is created by two flux flow coils embedded in the headstock & tailstock.
It can be used to test even & odd shaped components up to 400mm length, such as housings, small forgings & castings.
*Your information is safe with us.
| MOC | SS, MS |
| Power source | Electrical |
| Current rating | 2000 Amp, 2500 Amp & 3000 Amp. |
| Surface finish | Polished |
| Layout | Horizontal |
This machine is a vertical bench type two vector machine.
Circular Magnetic Field is generated by headshot & longitudinal field is created by encircling coil.
The job is clamped vertically in this machine. Small length parts such as fasteners can be easily processed in this machine. It is also possible to magnetize multiple components in one shot.