|Stand material||16 SWG MS Sheet|
|Surface coating||Powder Coated|
|Bottom sizes||0.5, 1.0 ml|
|Capacity (millilitre)||100 ml|
Centrifugal tube also called pear-shaped tube is used to measure the concentration of magnetic power in the bath.
|Usage||Used to check the presence and direction of magnetic field|
|Handle material||Non-ferrous metal|
ASTM PI Field Indicator is used to check the presence and direction of magnetic field. It comes with a non-ferrous handle for easy placement on the job. Artificial cracks are generated in an octagonal test piece. Lines which are perpendicular to the magnetic field give indications. Meets Requirements of ASTM E1444.
|Available design||Hooks type & Magnaflux Design|
We manufacture copper braided contact pads for use in magnetic particle inspection machines. There are two types of pads. Type 1 is fixed on contact plates with screws and is compatible with Magnaflux machines. The other model has the provision of hooks, through which it can be hanged on the contact plates for easy replacement. These pads can be made as per the size of contact plates in your machine
*Your information is safe with us.
|Available Pattern||Circular + Cross Bar Pattern and Straight Line Pattern (Burmah Castrol Strips)|
QQI's (Quantitative Quality Indicators) are magnetic particle test pieces with artificial defects used to verify proper field direction and adequate field strength. QQI's are very thin and flexible to conform to the geometry of the test piece. They must be held in intimate contact with the test piece by either tape or glue. Meet Requirements of ASTM E1444.