Compac Technologies India Limited
Phase 9, Mohali, Punjab
Send SMS
Send E-mail
| Layout | Horizontal |
| Standard Job Lengths | 450, 1000 mm |
| MOC | SS, MS |
| Application | used to check various components of the railway engine & bogie such as Draft Gear Assembly |
| Finish type | Polished |
| Power source | Electrical |
| useage | Commercial |
| Maximum Length | 450/ 1000 mm |
| Step Size | 50A |
| Shot Time | Adjustable from 0.5 to 1.5 s |
| Power source | Electrical |
| Capacity of Machine | ||||||
| 1000A | 2000A | 3000A | 4000A | 5000A | 6000A | |
| Component Data | ||||||
| Maximum Length | 450mm/1000mm* | |||||
| Maximum Diameter | 75mm | 100mm | 150mm | 200mm | 250mm | 300mm |
| Maximum Weight | 50Kg | 50Kg | 50Kg | 50Kg | 100Kg | 100Kg |
| Current Flow Data | ||||||
| Headshot Current (Amp.) Eff. | 1500A | 2000A | 3000A | 4000A | 5000A | 6000A** |
| Headshot Current Waveform | AC & HWDC | |||||
| Step Size (Amp) | 50A | |||||
| Shot Time | Adjustable from 0.5s to 1.5s | |||||
| Coil Capacity (KAT) Eff. | 6.0 | 7.5 | 10.0 | 12.5 | 10.0 | 10.0 |
| Step Size (KAT) | 0.1 | |||||
| Shot Time | Adjustable from 0.5s to 1.5s | |||||
| Flux Flow Coil Capacity (KAT) | 15.0 | 25.0 | ||||
| Flux Flow Current Waveform | FWDC | |||||
| Step Size | Manually Adjustable through Variac | |||||
| Shot Time | Adjustable from 0.5s to 1.5s | |||||
| Current rating | 4000A, 5000A, 6000A, 8000A, 9000A, 12000A, 1500A, 18000A, 24000A |
| Layout | Horizontal |
| Usage | used to check various components of the railway engine & bogie such as Draft Gear Assembly etc |
| MOC | MS, SS |
| Surface finish | Polished |
This machine employs a combination of headshot & threaded bar method to test coil springs. The movement of the threaded bar is automatic. It is available in various ampere ratings depending upon the OD of the spring. This machine is used extensively by railways to test springs of the bogie.
*Your information is safe with us.
| MOC | SS, MS |
| Surface finish | Polished |
| Layout | Horizontal |
| Power source | Electrical |
| Headshot Current Effective | 2000 (Amp) |
| Shot Time | From 0.5 to 1.5 s (Adjustable) |
| Step Size | 50 (Amp) |
This machine is used to check seams or longitudinal defects in black or bright steel bars. The machine checks the entire length of the bar at one time. This machine is semi-automatic as all the processes such as movement of the bar, spray, magnetization etc. are automatic. Only Headshot method is employed.
The loading & unloading of bars from the stack is automatic.
Additional details: